Introduction

The ANYCUBIC LCD UV 405nm Rapid Resin is a professional-grade resin designed specifically for LCD 3D printers. With optimized formation for LCD low light sources, this resin offers higher printing efficiency compared to other compatible resins in the market.

Main Features

• High-speed solidification for improved printing efficiency
• Strong adhesion of the model to the forming platform
• Easy detachment of the model after forming
• Rigid and tough material for enhanced accuracy and aesthetics
• Stable performance under different climatic conditions

Usage and Precautions

Storage Method

It is recommended to store the resin in a sealed container away from light at room temperature. Avoid exposure to UV light, as it can cause the resin to solidify. Excessive dust or moisture can also affect the print quality.

Usage

Before using the resin, shake it well to ensure proper consistency. It is important to wear gloves and work in a well-ventilated area to avoid direct contact with the skin. In case of accidental contact, rinse with plenty of water and seek medical attention if necessary.

After printing, clean the models with high-concentration alcohol for approximately 30 seconds. Do not pour the unused resin back into the resin vat and avoid leaving the resin in the vat for extended periods to prevent resin pollution and maintain printing quality.

Frequently Asked Questions

1. Can this resin be used with DLP or SLA machines?

No, this resin is specifically designed for LCD models and is not recommended for use with DLP or SLA machines.

2. Does this resin offer high-speed printing?

Yes, the ANYCUBIC LCD UV 405nm Rapid Resin ensures high-speed solidification, allowing for faster print times and improved printing efficiency on LCD machines.

3. Is the model easy to detach after forming?

Yes, this resin offers strong adhesion during printing, but also allows for easy detachment of the model from the forming platform.

4. How does this resin perform under different climatic conditions?

The ANYCUBIC LCD UV 405nm Rapid Resin is stable under various climatic conditions, making it suitable for use in different environments. It is also easy to store without the risk of softening or environmental corrosion.

Introduction

The ANYCUBIC LCD UV 405nm Rapid Resin is a professional-grade resin designed for 3D printers. It is optimized for LCD low light source and offers higher printing efficiency compared to other compatible resins in the market. This resin is specifically designed for LCD models and is not recommended for DLP or SLA machines.

Features

• High-speed solidification
• Strong adhesion and easy detachment after forming
• Rigid and tough material for improved accuracy and aesthetics
• Stable performance under different climatic conditions

Usage

1. Shake the resin well before use
2. Avoid using the resin in places with direct sunlight
3. Wear gloves to avoid direct skin contact and ensure proper ventilation in the room
4. In case of accidental contact, rinse with plenty of water and seek medical attention if necessary
5. Clean printed models with high-concentration alcohol for approximately 30 seconds
6. Do not pour unused resin back into the resin vat and avoid leaving resin in the vat for extended periods

Frequently Asked Questions

1. Can this resin be used with DLP or SLA machines?

No, this resin is specifically designed for LCD models and is not recommended for DLP or SLA machines.

2. How long does it take for the resin to solidify under UV light?

The bottom exposure time is recommended to be between 20-60 seconds, while the normal exposure time is between 5-15 seconds.

3. How should I store the resin?

It is recommended to store the resin in a sealed container at room temperature, away from direct sunlight. Excessive dust or moisture can affect the print quality.

4. What is the shelf life of this resin?

The resin has a shelf life of 1 year.